- Postoperative pet anti-licking Elizabethan collarLynxmotion Quadrature Motor Encoder V2 (w/Cable)

Title Default Title
Qty:

Description

  • Quadrature encoder with two output signals
  • Designed specifically for the Lynxmotion 12VDC 200rpm, 0.78Kg-cm GHM-16 w/ rear shaftand 7.2VDC 291RPM 11oz-in GHM-03 Spur Gear Head Motor (w/ Rear Shaft)
  • Mounts to the output shaft of the gearbox
  • Cable is included
  • Motor and mount are not included

The Lynxmotion Quadrature Motor Encoder V2 (w/Cable) is designed for the 12VDC, 200rpm, 0.78Kg-cm GHM-16 (w/ rear shaft) and 7.2VDC 291RPM 11oz-in GHM-03 Spur Gear Head Motor (w/ Rear Shaft) , sold separately. The original V1 encoder was discontinued, while the replacement does not properly fit over the plastic around the rear shaft, so a lexan spacer and tape is included.

  • USDigital Quadrature encoder top case (screws into Lexan below)
  • USDigital Quadrature encoder bottom case 
  • USDigital PCB and encoder disk
  • Lexan spacer (please remove plastic from both sides)
  • Two mounting screws to connect bottom base to lexan
  • Foam tape with adhesive backing on both sides
  • Connector cable

PDF file

  • Cycles per revolution: 100
  • Quadrature counts per revolution: 400
  • Frequency: 30kHz